Supply Chain Security Audit · C-TPAT

Your factory cannot hold C-TPAT. Your buyer’s can be lost at your gate.

Direct C-TPAT membership for foreign manufacturers is open to Mexico and Canada only. A Bangladesh factory is still audited against the same Minimum Security Criteria — because the US importer who buys from you carries the obligation, and passes it down the chain to the loading dock.

PURPOSEEvaluates perimeter security, cargo staging, access controls, and seal protocols to prevent contraband tampering and expedite destination customs clearance.
MINIMUM SECURITY CRITERIA
Focus areas
3
Criteria categories
12
Criteria, US importer set
93
High-security seal standard
17712
GATE 01
Perimeter
Fence line, lighting, camera coverage and the gaps that only show after dark.
GATE 02
Access
Who enters, carrying what, on whose authority — and how that is revoked.
GATE 03
Staging
Where finished export cargo waits, and how many people can reach it.
GATE 04
Seal
One ISO 17712 bolt seal, one named applier, one number that reconciles.
01 · The Part Most Pages Get Wrong

Who Can Actually Join C-TPAT

Start here, because it changes what the audit is for. If a vendor has offered to make your factory “C-TPAT certified”, this section is the one to read twice.

WHAT IS USUALLY ASSUMED

That a factory applies to US Customs and receives a certificate

The assumption is that a Bangladesh factory submits an application, passes an audit, and is issued a C-TPAT certificate it can forward to buyers. Certificates of this kind circulate. Agents sell them.

They do not come from US Customs and Border Protection, because there is no application route for them to come through.

WHAT CBP ACTUALLY ALLOWS

Direct foreign manufacturer membership is Mexico and Canada

CBP states that C-TPAT for Foreign Manufacturers is open to manufacturers in Mexico and Canada, with others admitted by invitation only. Eligibility requires incorporation in one of those two countries and an active CBP Manufacturer Identification (MID) number.

A factory in Bangladesh meets neither condition. There is no form to file and no certificate to be issued.

So what is the audit for? The US importer is the member, and membership is where the leverage sits. Under the Business Partners criteria, that member must screen new suppliers and monitor existing ones on a risk basis, and must be able to show CBP how it does so. Your audit report is that evidence. A finding at your gate does not go on your record — it goes on theirs, which is precisely why they ask. It also means the document worth having is a report written against the published Minimum Security Criteria, naming each criterion and whether it was met, not a certificate whose authority cannot be traced back to CBP.
02 · The Four Gates

Perimeter, Staging, Access, Seals

Four zones, walked in the order a carton travels them. Contraband is not introduced in a boardroom — it is introduced where cargo sits unwatched, and every control below exists to shorten that window.

01

Perimeter Security

The boundary is assessed as a continuous line, not a front gate. Most failures are at the back of the site, where the fence meets a neighbouring building or a drain.

  • Fencing condition along the full run, not the frontage
  • Lighting at gates, yard, dock and storage after dark
  • Camera coverage, retention period and who can view it
  • Whether alarm and camera faults have a repair record
02

Cargo Staging

Where finished export cargo waits between packing and loading, how it is segregated, and how many people can walk up to it without being noticed.

  • A defined, restricted staging area with controlled entry
  • Export cargo separated from domestic and returned goods
  • Written procedure for reporting shortages and overages
  • Inbound and outbound cargo reconciled against documents
03

Access Controls

Identification, authorisation and removal. The third one is skipped most often — a badge that still opens the gate months after the holder left is a finding on its own.

  • Photo ID issued, controlled and recovered on exit
  • Visitor, contractor and driver logs with purpose and escort
  • Package and mail screening before entry
  • Documented challenge procedure for unidentified persons
04

Seal Protocols

The narrowest control and the one with the clearest paper trail. A seal programme either reconciles end to end or it does not, and that is visible within an hour.

  • ISO 17712 high-security seals, bolt or cable
  • Seal stock stored under lock, issued against a log
  • Only named, trained staff authorised to apply seals
  • Written procedure for a broken or mismatched seal
03 · The Framework

Three Focus Areas, Twelve Categories

CBP rewrote the Minimum Security Criteria in 2019 and grouped them into three focus areas holding twelve categories. Each criterion inside them is marked Must or Should — a requirement or a recommended practice. Knowing which is which is the difference between a finding and a note.

FIRST FOCUS AREA

Corporate Security

Categories 1–4. Written, owned and reviewed — or it does not exist.
1. Security Vision & Responsibility
Senior management support, a named owner, and a programme with documented review.
2. Risk Assessment
A written, risk-based assessment of the supply chain, updated rather than filed once.
3. Business Partners
Screening and monitoring of partners, and accounting for their C-TPAT or AEO status.
4. Cybersecurity
System access control, password policy, backups and a documented incident response.
SECOND FOCUS AREA

Transportation Security

Categories 5–8. The container, the seal, the paperwork and what travels with them.
5. Conveyance & IIT Security
Inspection of containers and instruments of international traffic, and secure storage of them.
6. Seal Security
ISO 17712 seals, controlled issue, the VVTT verification process and discrepancy reporting.
7. Procedural Security
Documentation accuracy, cargo reconciliation, and reporting shortages, overages and anomalies.
8. Agricultural Security
Visible pest contamination and the condition of wood packing material and pallets.
THIRD FOCUS AREA

People & Physical Security

Categories 9–12. The site, the gate, the staff and what they were taught.
9. Physical Security
Fencing, gates, lighting, alarms and camera systems across handling and storage areas.
10. Physical Access Controls
Employee, visitor, vendor and driver identification, and the challenge procedure.
11. Personnel Security
Pre-employment verification, background screening where lawful, and removal on exit.
12. Education, Training & Awareness
Role-specific security training, with attendance records and measured understanding.
04 · Container And Seal

The Two Routines Auditors Watch Being Done

Not described — performed. We ask for a container to be inspected and a seal to be checked while we watch, because a procedure that exists only in a binder behaves differently when someone has to carry it out.

The seven-point container inspection

Required on every empty container before stuffing, recorded on a checklist that travels with the shipping documents. Air shipments use an eight-point inspection for unit load devices.
1
Front wall
2
Left side
3
Right side
4
Floor
5
Ceiling and roof
6
Inside and outside doors
7
Outside and undercarriage
Doors include the locking mechanisms and hinges. Repairs seen inside a wall should be visible outside it — a patch that appears on one side only is the classic concealment, and the reason the inspection runs in a fixed order rather than by eye.

Seal verification: the VVTT process

CBP’s four-step check, carried out every time a seal is applied and at each point the container changes hands. Two of the four steps are physical, and those are the two most often skipped.
V
View
Look at the seal and the container locking mechanisms for any sign of tampering before touching anything.
V
Verify
Check the seal number against the number written on the shipping documents. A mismatch stops the shipment.
T
Tug
Pull on the seal to confirm it is properly affixed and has actually engaged, not merely inserted.
T
Twist
Turn the bolt seal. A seal that rotates or separates under hand pressure has been compromised.
05 · Output

What You Can Send To A Buyer

Six documents, written so an importer’s compliance team can file them as business-partner evidence without rewriting anything. Where a control could not be tested, the report says so rather than leaving a gap that reads as a pass.

I
Criteria-mapped findings register
Every finding tied to the Minimum Security Criteria category it sits under, graded, with the evidence behind it and whether the criterion is a Must or a Should.
II
Site security assessment
Perimeter, lighting, camera coverage, gates and staging, recorded as observed on the day, with photographs and the positions they were taken from.
III
Access control review
Identification, visitor and driver logs, package screening and the challenge procedure, with a sample of records tested rather than a statement that records exist.
IV
Seal and container programme report
Seal standard, storage, issue log, authorised appliers, VVTT practice and the container inspection records, reconciled across a sample of recent shipments.
V
Corrective action plan
Each finding with an action, an owner, a due date and the evidence that will close it — written so it can be worked through without further interpretation.
VI
Buyer-ready summary
A short covering document your US importer can place on file as part of its business-partner screening, stating what was audited, against what, and on what date.
06 · Questions

Answered Without The Hedging

The six we are asked most often, including the two that vendors tend to answer vaguely because a clear answer would cost them a sale.

Can a Bangladesh factory become C-TPAT certified?
No. CBP opens direct C-TPAT membership for foreign manufacturers to companies incorporated in Mexico or Canada, with others by invitation only, and eligibility also requires an active CBP Manufacturer Identification number. What a Bangladesh factory can do is be audited against the Minimum Security Criteria and give that report to its US importer, who is the member. If a vendor offers you a C-TPAT certificate, ask which CBP office issues it.
Then why do buyers keep asking for a C-TPAT audit?
Because the Business Partners criteria oblige a member importer to screen and monitor its suppliers on a risk basis, and to demonstrate to CBP how it does so. Your audit is how they satisfy that. It is also why the report matters more than the label: they need something that maps to criteria they can point at.
What does the audit actually cover?
Perimeter security, cargo staging, access controls and seal protocols as the core, assessed against the twelve criteria categories in the three focus areas. For most garment and light-manufacturing sites the findings concentrate in physical security, access controls, seal handling and training records.
Which seals are acceptable?
High-security seals meeting or exceeding the current ISO 17712 standard. Both bolt and cable seals qualify. Beyond the seal itself, the audit looks at where stock is kept, who may draw it, who is authorised to apply it, whether numbers reconcile across the log and the shipping documents, and what the written procedure says to do when a seal is found broken or does not match.
How long does it take, and do you need notice?
A single site is usually one audit day, with document review before and the report after. Announced, semi-announced and unannounced are all possible; the choice belongs to whoever commissions it. An unannounced visit tells you more about lighting, staging and gate discipline, because those are the controls most easily arranged in advance.
Does passing speed up customs clearance?
Indirectly, and through the importer. C-TPAT benefits such as reduced examination rates and front-of-line treatment attach to the member, not to your factory. Keeping your buyer’s membership intact is what keeps their shipments moving — and a tampering incident traced to a supplier’s site is what puts it at risk.
START HERE

Send the seal log and one month of gate records.

Those two documents, read against each other, show most of what a security audit would find before anyone walks the perimeter. If your buyer has sent you their own criteria sheet, send that too — we audit against the version they will read.