Environment & Chemicals · Bangladesh

Environmental And Chemical Compliance Audit In Bangladesh

Review of wastewater treatment, chemical storage, restricted-substance lists (ZDHC, REACH), and environmental permits.

PURPOSE
Ensure the supplier meets buyer and regulatory environmental standards.
ZDHC MRSLREACH SVHCECR 2023ETP & sludge
WHAT WE REVIEW
Four Domains, One Visit
Wastewater Treatment
ETP capacity against real load, sludge, discharge records
Chemical Storage
Segregation, bunding, labelling, safety data sheets
Restricted Substances
ZDHC MRSL and REACH across the chemical inventory
Environmental Permits
Clearance certificate, category, validity and conditions
Documents  ·  Site walk  ·  Records sampling  ·  Subcontractor map

Scope

The Four Domains We Review

An environmental and chemical compliance audit checks what a factory puts into the water, what it keeps in its chemical store, what is in the chemicals themselves, and whether it holds the permits to operate at all. Each domain is tested three ways: the paperwork, what is visible on site, and what the records say happened when nobody was visiting.

01  Wastewater Treatment
DOCUMENTS
ETP design and capacity against actual production load, daily effluent logs, third-party test reports, sludge disposal records and the contractor’s licence.
ON SITE
Whether the ETP is actually running, flow meter readings, dosing chemicals in stock, bypass lines, outfall condition, and where sludge is physically stored.
COMMON FAILURES
An ETP sized for a smaller output than the factory now runs, logs filled in weekly in one handwriting, and sludge treated as ordinary waste.
02  Chemical Storage And Handling
DOCUMENTS
Chemical inventory with supplier and batch, safety data sheets in a language staff read, handler training records, and the emergency response procedure.
ON SITE
Segregation of incompatible chemicals, secondary containment and bunding, original labels intact, ventilation, eyewash and shower, spill kits that are not still sealed.
COMMON FAILURES
Decanted chemicals in unlabelled drums, the inventory not matching what is on the shelf, and safety data sheets filed in English only.
03  Restricted Substances (ZDHC, REACH)
DOCUMENTS
Conformance certificates for every formulation, the version of the list each certificate was issued against, test reports, and the buyer’s own RSL mapped to the inventory.
ON SITE
Whether chemicals in actual use appear on the approved list, purchasing control over substitutions, and who can introduce a new chemical without sign-off.
COMMON FAILURES
Expired certificates, certificates issued against a superseded list version, and a production chemical nobody can produce paperwork for.
04  Environmental Permits
DOCUMENTS
Environmental Clearance Certificate, location clearance where required, the assigned category, validity dates, conditions attached, and the renewal file.
ON SITE
Whether the certificate matches the building, the processes actually running, and the production capacity now installed rather than the capacity first declared.
COMMON FAILURES
A certificate that lapsed quietly, a category assigned before the factory added wet processing, and conditions on the certificate that were never implemented.

Restricted Substances

ZDHC And REACH Are Not The Same Obligation

Factories routinely treat these as one requirement. They are not. ZDHC restricts what may be used in the process; REACH governs what may be in the product placed on the EU market. A factory can be clean on one and exposed on the other.

 ZDHC MRSLREACH
What it restrictsSubstances intentionally used in manufacturing — dyes, auxiliaries, finishing and water-treatment chemicals.Substances present in the finished article or mixture placed on the EU market.
Who enforces itBrands and retailers, through supplier programmes and the ZDHC platform. Voluntary in law, contractual in practice.EU law, enforced by member-state authorities and at the border. Not optional.
Current positionZDHC launched MRSL Version 4.0 in late October 2026, adding 16 substances not covered by V3.1 and strengthening PFAS requirements. Separately, the ZDHC Wastewater and Sludge Guidelines Version 2 take effect on 1 December 2026.The SVHC Candidate List stood at 253 entries after ECHA’s update of 4 February 2026, which added n-hexane and bisphenol AF. An Annex XVII update also adds 22 CMR substances, and the EU-wide PFAS restriction is still progressing.
What we checkEvery formulation in the chemical inventory against a conformance certificate, and the list version that certificate was issued against.Whether the factory and its material suppliers can evidence article-level status, and whether anyone is tracking Candidate List updates at all.
Typical gapCertificates held for the headline dyes but not for auxiliaries, softeners and ETP dosing chemicals.No process for re-checking when the Candidate List changes, so compliance is true on the day of purchase and unverified afterwards.
Version control is the whole game. Sources differ on exactly when MRSL V4.0 becomes mandatory inside each brand programme, and entry counts on the Candidate List are not the same as substance counts because some entries cover groups. Before an audit we confirm, in writing, which list version your buyer is holding the factory to on that date. Positions stated here are as at November 2026 and are re-checked at each audit.

Local Law

Bangladesh Environmental Permits A Supplier Must Hold

The Environment Conservation Rules 2023 (S.R.O. 53-Law/2023, gazetted 5 March 2023) replaced the 1997 Rules. They classify industrial units into four categories — Green, Yellow, Orange and Red — by activity and pollution load, and the category decides what the factory must hold and how often it renews.

PERMIT 1
Environmental Clearance Certificate
Issued by the Department of Environment and required for all four categories, Green included. This is the document that lets the unit operate. We check the category assigned, the validity window, the conditions attached to it, and whether the scope on the certificate matches the processes actually running.
PERMIT 2
Location Clearance Certificate
Required before clearance for Yellow, Orange and Red units, and obtained first. Units inside government or private export processing zones, economic zones and BSCIC industrial estates are exempt from this one and need only the clearance certificate — a distinction buyers frequently get wrong when reviewing documents.
PERMIT 3
Category Obligations
Fabric dyeing, washing and chemical wet processing sit in the most polluting band. Higher categories carry additional duties: an environmental management plan, effluent records kept daily with periodic summaries to the Department, and a qualified environmental officer. We verify these are running, not merely written.
The trap buyers fall into. A valid-looking certificate proves very little on its own. Categories are assigned at set-up, and factories expand. A unit cleared years ago as a cutting-and-sewing operation that has since added washing or dyeing may be operating outside the scope it was cleared for, with a certificate that still looks current on the wall.

Red Flags

What We Look For First

Environmental findings rarely announce themselves. These are the checks that separate a factory running a treatment plant from one that owns a treatment plant.

Power Consumption Of The ETP
A treatment plant that runs draws electricity. Comparing ETP power usage against production months is the fastest way to see whether it is switched on only for visitors.
Treatment Chemical Purchase Records
Dosing chemicals are consumed in proportion to effluent volume. Purchase quantities that do not track production tell you more than any logbook.
Bypass Lines And Outfall
We trace the pipe route physically, not on a drawing. A line that routes around the plant, or an outfall stained differently from the treated discharge, is a finding on its own.
Sludge Destination
Treating effluent produces sludge. If nobody can show where it went and who was licensed to take it, the pollution was moved rather than removed.
Inventory Versus Shelf
We walk the chemical store with the inventory in hand. Anything on the shelf that is not on the list has no conformance certificate behind it by definition.
Certificate Version Dates
A conformance certificate names the list version it was issued against. Against a superseded version it is a historical document, not current evidence.
Subcontracted Wet Processing
Washing, dyeing or printing sent to an undeclared unit moves the environmental risk somewhere nobody has audited, while the main factory stays clean on paper.
Scope Drift Against The Permit
We compare the processes running today with the processes the clearance certificate was issued for. Expansion without re-categorisation is common and consequential.

Deliverables

What You Receive

Scope note. This is an independent second-party audit commissioned by you as the buyer. We are not a laboratory, a certification body or a ZDHC-approved solution provider, and we do not issue clearance certificates or platform scores. Where testing is needed we specify the parameters and let an accredited laboratory run them, then interpret the results against your buyer’s limits and the applicable discharge standards.
How This Fits With Your Other Audits
Environmental and chemical audit
Answers: what does this factory discharge, store and use? This page.
Social compliance audit
Answers: how are the workers treated? See social compliance and ethical audit.
Quality system audit
Answers: will quality hold across future orders? See quality management system audit.

FAQs

Environmental And Chemical Audit FAQs

It is an on-site review of four things: how the factory treats its wastewater, how it stores and handles chemicals, whether the chemicals it uses conform to restricted-substance lists such as ZDHC MRSL and REACH, and whether it holds valid environmental permits. The purpose is to confirm the supplier meets both your buyer requirements and the regulations that apply where the factory operates.

ZDHC restricts substances intentionally used in the manufacturing process — dyes, auxiliaries and finishing chemicals. REACH governs what is present in the finished article placed on the EU market. ZDHC is contractual, imposed by brands through their supplier programmes; REACH is EU law. A factory can hold ZDHC conformance certificates and still have a REACH exposure in the finished product.

ZDHC launched MRSL Version 4.0 in late October 2026, adding 16 substances beyond Version 3.1 and tightening PFAS requirements. Sources differ on the exact point at which each brand programme switches over, so we confirm in writing which version your buyer is applying before the audit rather than assuming. The ZDHC Wastewater and Sludge Guidelines Version 2 take effect on 1 December 2026.

The SVHC Candidate List stood at 253 entries following ECHA’s update of 4 February 2026, which added n-hexane and bisphenol AF. Note that entries are not the same as individual substances, because some entries cover whole groups. ECHA updates the list periodically, so any audit report states the version checked and the date.

Under the Environment Conservation Rules 2023, every category — Green, Yellow, Orange and Red — needs an Environmental Clearance Certificate from the Department of Environment. Yellow, Orange and Red units also need a Location Clearance Certificate first. Units inside export processing zones, economic zones and BSCIC industrial estates are exempt from location clearance and need only the clearance certificate.

No. We are not a laboratory. We specify which parameters need testing, witness the sampling so the sample is traceable to the discharge point, use an accredited laboratory, and then interpret the results against your buyer’s limits and the applicable discharge standards. Separating the auditor from the laboratory keeps the result defensible.

The scope is lighter but not zero: chemical storage for spot cleaners and adhesives, waste handling, and a valid clearance certificate still apply. The bigger question is whether washing, dyeing or printing is subcontracted out. If it is, the environmental risk sits in that unit, and most buyer programmes hold you responsible for it.

You receive a graded finding register and a corrective action plan with a named owner, root cause and due date for each item, followed by verification. Most environmental findings are fixable within a production cycle. The exceptions are structural ones — an undersized treatment plant, or operating outside the permitted category — which need investment and a realistic timeline rather than a promise.

NEXT STEP

Send Us The Factory’s Clearance Certificate And Chemical List

We will tell you which category the unit sits in, whether the certificate still matches the processes running, which chemicals have no conformance evidence behind them, and whether a full audit or a document review is the right next step.