Quality Assurance · Bangladesh
Quality Management System Audit For Bangladesh Factories
Evaluation of the factory’s internal QC procedures, inspection records, calibration, and corrective-action discipline, benchmarked against ISO 9001 principles. The purpose is to predict whether quality will be consistent, not just acceptable on one visit.
Definition
What A Quality Management System Audit Is
A quality management system audit is a structured on-site examination of how a factory controls quality — not an inspection of one shipment. The auditor looks at the system behind the product: what the factory has written down, what records it keeps and for how long, whether the equipment it measures with is calibrated, and whether defects are closed out at root cause.
It is a second-party audit. You commission it as the buyer, on your own supplier or candidate supplier, against your quality standard and against ISO 9001 principles. Four areas carry most of the predictive weight.
Consistency, Not One Good Day
Why One Good Inspection Day Predicts Nothing
A factory can prepare for a visit. It cannot retroactively produce a year of calibration certificates, defect-coded inspection records and closed corrective actions. That gap is exactly what a system audit measures — and exactly what a one-day walkthrough misses.
Clause Map
What We Check, Clause By Clause
Findings are anchored to ISO 9001 clauses so they mean something to your quality team and to the factory’s own quality manager. Each line below pairs the clause with the objective evidence we ask to see.
Principles
The Seven Quality Management Principles We Score Against
ISO 9001 rests on seven quality management principles. Clauses tell you what must exist; the principles tell you whether it is real. For each one we ask a plain question that a factory either can or cannot answer with evidence.
Standard Update
ISO 9001:2026 And What It Changes For Supplier Audits
ISO 9001:2026 was published on 16 September 2026 and is now the current edition, replacing ISO 9001:2015. Certificates against the 2015 edition stay valid through a three-year transition period, so for the next few years your supply base will hold a mix of both. That mix is a practical audit problem, and it is one we check rather than assume.
The revision is an evolution rather than a rewrite. It aligns the text with the current harmonised structure used across ISO management system standards, gives explicit weight to quality culture and ethical behaviour at top-management level, separates the treatment of risks and opportunities into distinct sub-clauses, and raises the profile of sustainability. The climate change amendment to the 2015 edition, published in February 2024, already applied with no transition period. Transition milestones are published by ISO/TC 176.
- A certificate that still says 2015 is not expired. Treating it as a red flag today is simply wrong.
- A factory claiming a 2026 certificate needs a certification body that is actually accredited for the new edition — worth verifying, not assuming.
- We check three things on any certificate: the edition, the certification body, and the accreditation mark. A framed certificate on a wall is not evidence on its own.
- Certification covers a defined scope and site. We confirm that the scope on the certificate matches the product and the building you will actually be producing in.
Deliverable
What The Audit Report Contains
- Scope and context — sites covered, dates, departments walked, people interviewed.
- Scorecard — the five audit areas, each scored against evidence seen.
- Finding register — every finding graded major, minor or observation.
- Objective evidence — for each finding: document reference, record sampled, equipment identification.
- Pattern analysis — where several findings share one root cause.
- Corrective-action request — each item with an owner and a due date.
- Verification plan — how closure will be confirmed, by document review or a follow-up visit.
- Recommendation — proceed, proceed with conditions, or do not proceed, against your quality standard.
- Quality manual and inspection procedures
- Inspection records for recent completed orders
- Calibration register and certificates
- Nonconformity and corrective-action log
- Internal audit reports and management review minutes
- Approved supplier list and incoming inspection records
- Inspector training and qualification records
- Organisation chart showing the QC reporting line
Scope Boundary
What This Audit Is Not
Buyers often ask for “an audit” and mean three different things. Being clear about the boundary saves a wasted visit.
A system audit is usually commissioned alongside supplier verification and factory audit during onboarding, and repeated through continuous re-screening once a supplier is live.
FAQs
Quality Management System Audit FAQs
What is a quality management system audit?
It is a structured on-site examination of how a factory controls quality: its internal QC procedures, its inspection records, the calibration of its measuring equipment, and its corrective-action discipline, benchmarked against ISO 9001 principles. The aim is to predict whether quality will be consistent across future orders, not to judge one shipment.
How is a QMS audit different from a pre-shipment inspection?
A pre-shipment inspection samples one finished lot against an AQL plan and tells you whether that lot is acceptable. A system audit examines the factory’s controls and tells you whether the next ten lots are likely to be acceptable. One is a verdict on goods; the other is a forecast on capability.
Is this an ISO 9001 certification audit?
No. Only an accredited certification body can issue an ISO 9001 certificate. This is a second-party audit: you commission it as the buyer, we benchmark the factory against ISO 9001 principles and clauses, and you receive a decision-grade report. We are not a certification body.
Do you audit factories that are not ISO 9001 certified?
Yes, and most of our audits are of uncertified factories. Certification is not the point; a documented, working control system is. Plenty of uncertified Bangladeshi factories run disciplined quality control, and certification alone never guarantees it.
Which ISO 9001 edition do you audit against now?
ISO 9001:2026 was published on 16 September 2026 and is the current edition. Because certificates against ISO 9001:2015 stay valid through a three-year transition, we assess against whichever edition the factory is working to, and report the edition, certification body and accreditation mark so you can see exactly where the supplier stands.
What records should the factory have ready?
Quality manual and inspection procedures, inspection records for recent completed orders, the calibration register with certificates, the nonconformity and corrective-action log, internal audit reports, management review minutes, approved supplier list with incoming inspection records, inspector training records, and an organisation chart showing the QC reporting line.
How are findings graded?
Major for a control that is absent or has failed in a way that can reach your product; minor for a control that exists but is applied inconsistently; observation for a weakness that has not yet caused a problem. Every grade is tied to objective evidence — a document reference, a record sampled, or a piece of equipment identified.
What happens if a factory does not pass?
A failed audit is not automatically a rejected supplier. You receive the finding register, a corrective-action request with owners and due dates, and a verification plan. Many factories close major findings and become usable. The report tells you what has to change and how you will know it changed.
Know Whether Quality Will Hold Before You Place The Order
Send us the factory name, the product and your quality standard. We will confirm the audit scope, tell you which records the factory needs to have ready, and give you a report you can make a sourcing decision from.
