Price Benchmarking And Cost Analysis
Independent evaluation of quoted prices against market rates, raw-material costs, and comparable factory quotes.
What A Quoted FOB Price Is Actually Made Of
The purpose is simple: ensure the buyer pays a fair price and understands the cost structure. A quote is a single number. Underneath it sit five lines, and only one of them is usually negotiable in the way buyers assume. Benchmarking rebuilds those lines from the outside so you can see which part of the price is market and which part is markup.
What We Compare Your Quote Against
Four independent references, read together. Any one of them alone can be argued away; together they close the room for a number that has no explanation behind it.
| Benchmark | What It Tells You | Where It Comes From |
|---|---|---|
| Raw-material index | Whether the fabric line tracks the actual cotton and yarn market, or a price fixed months ago and never revisited. | Cotlook A Index and local yarn and greige quotations. The A Index stood at about USD 1.90 per kg in June 2026, against USD 1.73 a year earlier. |
| Comparable factory quotes | What the same style, specification and quantity is being quoted at by other qualified factories in the same month. | Live quotations gathered from comparable units, on your own tech pack rather than a generic brief. |
| CM build-up | Whether the making cost is arithmetically defensible: standard minute value, line efficiency, operator count and the wage floor. | Rebuilt from the style, then tested against the legal wage floor of Tk 12,500 per month for the entry grade. |
| Landed-cost view | Whether a lower FOB survives freight, duty and lead time, or quietly costs more once the goods reach you. | FOB plus freight, duty and handling for your destination market. |
A Quote You Can Argue With, Not Just Accept
Most negotiations fail in the same way: the buyer asks for a lower number and the factory gives one, so something invisible gets worse. Benchmarking moves the conversation to lines instead of totals.
WITHOUT A BENCHMARK
- One number per style, with no sheet behind it
- Fabric priced at a rate nobody can date
- CM accepted because it “sounds about right”
- Discount won on the total, recovered on quality
- Nominated trim suppliers never questioned
- Price increases arrive as a fact, not a calculation
WITH A BENCHMARK
- A line-by-line sheet you and the factory both read
- Fabric tested against a dated market reference
- CM checked against minutes, efficiency and wage floor
- Negotiation aimed at the line that is actually out
- Trim and accessory markups surfaced separately
- Future increases predicted before they are announced
How The Analysis Runs
The Deliverables
Price Benchmarking FAQs
What is price benchmarking and cost analysis?
It is an independent evaluation of a quoted price against market rates, raw-material costs and comparable factory quotes. Rather than asking whether a number feels high, it rebuilds the cost sheet from the outside — fabric, trims, cut-make-trim, overhead and margin — and shows which lines are consistent with the market and which are not. The output is a sheet you can put in front of the supplier, not an opinion.
How is this different from just asking for an open cost sheet?
An open cost sheet is the factory’s own account of its costs, and it is useful. But it is supplied by the party being questioned, built on its own fabric rates and its own efficiency assumptions. Benchmarking is reconstructed independently and then compared with the factory’s version. Where the two agree, you have confirmation. Where they diverge, you have a specific question rather than a general suspicion. The two work best together.
What share of an FOB price is fabric?
For basic cotton garments, industry costing guides most commonly place fabric at 50 to 70 percent of the FOB price, making it the largest single line. The figure is lower on styles where making cost dominates — structured, multi-operation or heavily finished garments — where published worked examples land closer to 50 percent or below. Published sources genuinely disagree, which is why a template percentage applied to your quote proves nothing. The share has to be rebuilt from your own consumption and construction.
Can you check whether a CM rate is fair?
Yes, and this is the line that can be checked arithmetically rather than argued over. Cut-make-trim is built from the standard minute value of the style, the line efficiency the factory actually achieves, the operator count and the wage cost per minute. Each of those can be reconstructed and tested. A CM quote that cannot be traced back to minutes and efficiency is a number, not a cost.
Will the Bangladesh wage revision change my price?
Probably, if your order runs past it. The garment minimum wage has been Tk 12,500 per month at entry grade since 1 December 2023, with a 9 percent annual increment on basic wage from December 2024. A new Minimum Wage Board was formed on 1 November 2026 after sustained worker protests for a Tk 30,000 floor. Labour sits inside the CM line rather than across the whole price, so a wage revision does not move FOB by the same proportion. We model the effect on your specific style so the increase arrives as a calculation you already expected.
Does a lower FOB always mean a lower cost?
No. FOB covers the goods to the port of loading and nothing beyond it, so freight, duty, handling and lead time all sit outside the quote. A lower FOB from a factory with longer lead times or weaker on-time performance can cost more once airfreight on a late shipment, markdowns or a missed season are counted. We report the landed view alongside the FOB comparison for exactly this reason.
Do you negotiate with the factory for us?
No. We are not a buying agent and we take no commission on savings, because a fee tied to the reduction would give us a reason to push a number past where it should go. We give you the reconstructed sheet, the variance against benchmark and a brief on which lines to press and which to leave alone. The conversation with your supplier stays yours.
How long does a benchmarking exercise take?
It depends on how much of the specification already exists. With a complete tech pack and a quote in hand, rebuilding the sheet and dating the raw-material references is quick. Gathering live comparable quotes from qualified factories is the part that takes real time, because the comparison is only worth anything if the other factories are quoting on your actual specification and quantity rather than a generic brief.
