Quality Control Inspection · Bangladesh
During Production Inspection (DUPRO) in Bangladesh
Inspect goods while manufacturing is underway to identify defects, specification deviations, and process problems early enough for the factory to take corrective action. Our inspectors visit the factory once part of your order is made, check it against your specification and approved sample, and send you a photo report so you can act before the whole batch is finished.
Definition
What Is a During Production Inspection?
A During Production Inspection (DPI), also known as a DUPRO (During Production Check) or In-Line Inspection, is an on-site quality control service performed while goods are actively being manufactured. It typically takes place once 10% to 80% of an order is completed (most commonly around 15%–40%), allowing buyers to catch and fix defects before the entire batch is finished.
A pre-shipment inspection tells you whether finished goods pass. A DPI tells you early, while there is still time to change materials, retrain workers, adjust machines or move the shipping date, instead of rejecting a finished order.
- Also called
- DUPRO, During Production Check, In-Line Inspection
- When
- When 10% to 80% of the order is made, most often 15% to 40%
- Where
- On site, at the factory floor and finished-goods area
- Sampling
- Random sampling under ISO 2859-1 (ANSI/ASQ Z1.4) AQL tables
- Defects graded
- Critical, major and minor
- You receive
- A written report with photos, measurements, defect counts and a clear result
Inspection checklist
What We Check During Production
Every inspection follows a checklist built from your purchase order, specification and approved sample. These eight checks form the core of each visit.
Production Status
Units made, units packed and line speed, compared with your shipping date.
Function and Field Tests
Assembly, fit, strength or other on-site tests agreed in the checklist.
Materials and Components
Raw materials and parts in use match the approved specification and sample.
Marking and Labelling
Labels, barcodes, care and origin marks checked for content and position.
Workmanship and Defects
Random samples checked and every defect graded critical, major or minor.
Packing Materials
Cartons, inner packs and shipping marks checked before mass packing starts.
Measurements
Size, weight and dimensions measured against your tolerance chart.
Corrective Actions
Root causes noted and agreed with the factory, then re-checked later.
Industries we inspect
During Production Inspection by Product Category
Bangladesh exports far more than garments. Each product category has its own failure points, so each inspection checklist is different.
Non-Leather, Synthetic & Leather Footwear
Footwear defects are often built in early, at cutting, stitching and lasting. A mid-run check catches them before thousands of pairs are made.
- Upper cutting, stitching density and thread colour
- Sole bonding and cementing, with a flex and pull check
- Size marking, pair matching and left-right symmetry
- Leather grain, synthetic surface and colour shade against the approved sample
Technical Textiles, Man-Made Fiber (MMF) Workwear & PPE
Workwear and protective garments must match technical specifications, not only appearance. We check the details that decide whether they can be sold.
- Fabric weight (GSM), shade and visible fabric faults
- Seam construction, bar-tacks and closures
- Reflective tape position and sewing on high-visibility garments
- Size measurements and required care, fibre and PPE labels
Molded Plastics, Housewares & Industrial Packaging
Moulding problems repeat on every shot until the tool or settings change, so finding them early saves the whole run.
- Flash, short shots, sink marks, warpage and burn marks
- Wall thickness, weight and key dimensions
- Colour consistency between batches and lids
- Lid fit, stacking, drop or leak checks where agreed
Light Engineering, Bicycle Components & Cast Metal Goods
Engineering goods fail on fit and strength. We measure against your drawings and test assemblies while the line is still running.
- Dimensions checked with calipers, gauges and thread gauges
- Weld quality, casting porosity and surface cracks
- Paint, plating or powder-coat finish and adhesion
- Assembly fit, function and rust protection before packing
Eco-Packaging, Diversified Jute, Seagrass & Home Decor
Natural fibre products vary from batch to batch. A during production check keeps size, finish and moisture within your limits.
- Weave density, size and shape against the approved sample
- Moisture content and any sign of mould
- Handle, stitching and seam strength on bags
- Colour, finishing, loose fibres and printed artwork
Frozen and Processed Food (Shrimp, Fish, Agro)
For frozen and processed food, a mid-run check confirms grading, weights and packing while processing is still underway.
- Grading, size count and uniformity against the buyer’s specification
- Net weight and glazing checks on frozen products
- Packing integrity, labels and lot coding
- Visible product defects and storage temperature records
Ship Recycling Materials and Scrap Steel
For recycled steel and scrap, the buyer’s contract grade decides the price. We check material while it is being sorted, cut and loaded.
- Material grade and sorting against the contract specification
- Cut sizes and dimensions of plates and sections
- Visible contamination and non-metallic material
- Weight records and lot marking for traceability
Product Not Listed?
Send us your purchase order, specification and approved sample. We will build a checklist for your product and tell you which inspection stage fits best.
Inspection stages
DPI vs Pre-Production and Pre-Shipment Inspection
A during production inspection sits in the middle of the production cycle. It is the last point where defects can be fixed across most of the order.
| Inspection | When | Main purpose | Can you still fix problems? |
|---|---|---|---|
| Pre-Production Inspection | Before production starts | Check raw materials, components and the first samples | Yes, before any goods are made |
| During Production Inspection | 10% to 80% made, most often 15% to 40% | Check early output, find defect trends and confirm the schedule | Yes, on the remaining production |
| Pre-Shipment Inspection | Goods finished and mostly packed | Accept or reject the finished lot | Only by rework or delay |
| Container Loading Check | During loading | Confirm quantity, packing and loading condition | Very limited |
Need a full quality plan? See our quality control inspection service and inspections and factory audit.
How it works
How a During Production Inspection Works
- Share your order detailsPurchase order, specification, approved sample, factory address and production dates.
- Agree the checklist and AQLWe turn your requirements into an inspection checklist and agree the sampling level.
- Inspect on siteThe inspector checks production status, draws random samples, measures, tests and photographs.
- Review with the factoryFindings are shared with the factory so corrective action can start the same day.
- Receive the reportYou get a report with photos, measurements, defect counts and a clear result.
How AQL Sampling Works
Instead of checking every unit, the inspector picks a random sample sized by the lot quantity and the inspection level in ISO 2859-1. The AQL sets how many defects of each type the sample may contain before the result is a fail.
A common AQL setting for consumer goods. Your limits can be stricter or looser and are agreed before the inspection.
FAQs
During Production Inspection Questions
Short answers to the questions buyers ask most before booking a DUPRO in Bangladesh.
Need fire, electrical or structural checks too? See our factory safety inspection.
What is a during production inspection?
A during production inspection (DPI or DUPRO) is an on-site quality check made while goods are being manufactured, usually when 10% to 80% of the order is complete. It finds defects early so the factory can fix them on the rest of the order.
When should a DUPRO be done?
Most buyers book it when around 15% to 40% of the order is made. That is late enough to see real production output and early enough to correct problems on most of the order.
What is the difference between DPI and pre-shipment inspection?
A DPI checks goods while production is still running so problems can be fixed. A pre-shipment inspection checks finished, mostly packed goods to decide whether the lot is accepted before it ships.
Is an in-line inspection the same as a during production inspection?
Yes. In-line inspection, DUPRO and During Production Check are common names for the same service: checking goods on site while they are being produced.
What sampling standard do you use?
We use random sampling under ISO 2859-1, also known as ANSI/ASQ Z1.4, with AQL limits for critical, major and minor defects that you agree before the inspection.
Which products can you inspect in Bangladesh?
We inspect footwear, technical textiles and workwear, plastics, light engineering and metal goods, jute and home decor, frozen and processed food, and recycled steel. Other products can be covered with a custom checklist.
What happens if the inspection finds defects?
The findings are shared with you and the factory. The factory agrees corrective actions, and the corrections can be confirmed in a follow-up visit or at the pre-shipment inspection.
How do I book a during production inspection?
Contact us with your purchase order, specification, factory address and expected production dates. We will confirm the checklist, sampling level and inspection date.
Find Defects While There Is Still Time to Fix Them
Tell us your product, factory location and production dates. We will propose a checklist, sampling level and inspection date.
