Environment & Chemicals · Bangladesh
Environmental And Chemical Compliance Audit In Bangladesh
Review of wastewater treatment, chemical storage, restricted-substance lists (ZDHC, REACH), and environmental permits.
Scope
The Four Domains We Review
An environmental and chemical compliance audit checks what a factory puts into the water, what it keeps in its chemical store, what is in the chemicals themselves, and whether it holds the permits to operate at all. Each domain is tested three ways: the paperwork, what is visible on site, and what the records say happened when nobody was visiting.
Restricted Substances
ZDHC And REACH Are Not The Same Obligation
Factories routinely treat these as one requirement. They are not. ZDHC restricts what may be used in the process; REACH governs what may be in the product placed on the EU market. A factory can be clean on one and exposed on the other.
| ZDHC MRSL | REACH | |
|---|---|---|
| What it restricts | Substances intentionally used in manufacturing — dyes, auxiliaries, finishing and water-treatment chemicals. | Substances present in the finished article or mixture placed on the EU market. |
| Who enforces it | Brands and retailers, through supplier programmes and the ZDHC platform. Voluntary in law, contractual in practice. | EU law, enforced by member-state authorities and at the border. Not optional. |
| Current position | ZDHC launched MRSL Version 4.0 in late October 2026, adding 16 substances not covered by V3.1 and strengthening PFAS requirements. Separately, the ZDHC Wastewater and Sludge Guidelines Version 2 take effect on 1 December 2026. | The SVHC Candidate List stood at 253 entries after ECHA’s update of 4 February 2026, which added n-hexane and bisphenol AF. An Annex XVII update also adds 22 CMR substances, and the EU-wide PFAS restriction is still progressing. |
| What we check | Every formulation in the chemical inventory against a conformance certificate, and the list version that certificate was issued against. | Whether the factory and its material suppliers can evidence article-level status, and whether anyone is tracking Candidate List updates at all. |
| Typical gap | Certificates held for the headline dyes but not for auxiliaries, softeners and ETP dosing chemicals. | No process for re-checking when the Candidate List changes, so compliance is true on the day of purchase and unverified afterwards. |
Local Law
Bangladesh Environmental Permits A Supplier Must Hold
The Environment Conservation Rules 2023 (S.R.O. 53-Law/2023, gazetted 5 March 2023) replaced the 1997 Rules. They classify industrial units into four categories — Green, Yellow, Orange and Red — by activity and pollution load, and the category decides what the factory must hold and how often it renews.
Red Flags
What We Look For First
Environmental findings rarely announce themselves. These are the checks that separate a factory running a treatment plant from one that owns a treatment plant.
Deliverables
What You Receive
- Permit register: certificate, category, validity and attached conditions
- ETP assessment against actual production load, not design brochure
- Chemical inventory reconciled line by line against the store
- Conformance gap list showing missing and out-of-version certificates
- Chemical storage and spill-control findings with photographic evidence
- Subcontracted wet-processing map for the full production chain
- Corrective action plan with owner, root cause and due date per item
- Follow-up verification and a re-check date tied to list-version changes
FAQs
Environmental And Chemical Audit FAQs
What is an environmental and chemical compliance audit?
It is an on-site review of four things: how the factory treats its wastewater, how it stores and handles chemicals, whether the chemicals it uses conform to restricted-substance lists such as ZDHC MRSL and REACH, and whether it holds valid environmental permits. The purpose is to confirm the supplier meets both your buyer requirements and the regulations that apply where the factory operates.
What is the difference between ZDHC and REACH?
ZDHC restricts substances intentionally used in the manufacturing process — dyes, auxiliaries and finishing chemicals. REACH governs what is present in the finished article placed on the EU market. ZDHC is contractual, imposed by brands through their supplier programmes; REACH is EU law. A factory can hold ZDHC conformance certificates and still have a REACH exposure in the finished product.
Which ZDHC MRSL version applies right now?
ZDHC launched MRSL Version 4.0 in late October 2026, adding 16 substances beyond Version 3.1 and tightening PFAS requirements. Sources differ on the exact point at which each brand programme switches over, so we confirm in writing which version your buyer is applying before the audit rather than assuming. The ZDHC Wastewater and Sludge Guidelines Version 2 take effect on 1 December 2026.
How many substances are on the REACH Candidate List?
The SVHC Candidate List stood at 253 entries following ECHA’s update of 4 February 2026, which added n-hexane and bisphenol AF. Note that entries are not the same as individual substances, because some entries cover whole groups. ECHA updates the list periodically, so any audit report states the version checked and the date.
Which environmental permits must a Bangladesh factory hold?
Under the Environment Conservation Rules 2023, every category — Green, Yellow, Orange and Red — needs an Environmental Clearance Certificate from the Department of Environment. Yellow, Orange and Red units also need a Location Clearance Certificate first. Units inside export processing zones, economic zones and BSCIC industrial estates are exempt from location clearance and need only the clearance certificate.
Do you test the wastewater yourselves?
No. We are not a laboratory. We specify which parameters need testing, witness the sampling so the sample is traceable to the discharge point, use an accredited laboratory, and then interpret the results against your buyer’s limits and the applicable discharge standards. Separating the auditor from the laboratory keeps the result defensible.
Our factory only cuts and sews. Does this apply to us?
The scope is lighter but not zero: chemical storage for spot cleaners and adhesives, waste handling, and a valid clearance certificate still apply. The bigger question is whether washing, dyeing or printing is subcontracted out. If it is, the environmental risk sits in that unit, and most buyer programmes hold you responsible for it.
What happens if the audit finds a problem?
You receive a graded finding register and a corrective action plan with a named owner, root cause and due date for each item, followed by verification. Most environmental findings are fixable within a production cycle. The exceptions are structural ones — an undersized treatment plant, or operating outside the permitted category — which need investment and a realistic timeline rather than a promise.
Send Us The Factory’s Clearance Certificate And Chemical List
We will tell you which category the unit sits in, whether the certificate still matches the processes running, which chemicals have no conformance evidence behind them, and whether a full audit or a document review is the right next step.
