Final Random Inspection · Bangladesh
Pre-Shipment Inspection (PSI) Services in Bangladesh
We are a Pre-Shipment Inspection (PSI) service provider. PSI, also known as a Final Random Inspection (FRI), is a quality control check performed right before your goods leave the factory. It takes place once 100% of the order is manufactured and at least 80% is packed for export.
When a PSI takes place
How it works
How Our Pre-Shipment Inspection Works
You submit the buyer’s purchase order, product specifications, reference samples, and Acceptance Quality Limit (AQL) tolerances to us as your third-party inspection agency. Our inspector schedules a visit for when production is finished and at least 80% of cartons are sealed. Our inspector opens the selected cartons and evaluates the goods against your checklist:
- Quantity
- Workmanship
- Function
- Measurements
- Labelling
- Packaging
The result is your go/no-go decision before you pay the supplier’s final balance and ship.
For buyers
What PSI Means for Your Order
Final Quality Gate
It is your last chance to verify product quality, safety, and accuracy before paying the supplier’s final balance and shipping the goods. We act as that final gate.
Quantity & Packing Verification
We confirm that the exact number of units you ordered are finished, properly labeled, and safely packed for transit.
Import Compliance
Goods that fail the destination country’s rules can be held at the port. We check labels, markings and shipping documents against the import requirements of your market before the goods leave Bangladesh.
Our services
Pre-Shipment Inspection and Shipment Services
Twelve services that cover the last stage of your order, from the final inspection to the moment your goods leave Bangladesh.
Final inspection
Pre-Shipment Inspection (PSI) / Final Random Inspection
Statistical AQL-based inspection when at least 80% of goods are packed, covering quantity, workmanship, function, measurements, labelling, and packaging.
Purpose: The buyer’s final go/no-go decision before payment and shipment.
100% Piece-by-Piece Inspection and Sorting
Full inspection of every unit, with defective goods segregated.
Purpose: For high-value, high-risk, or previously failed orders where sampling is insufficient.
Laboratory Testing Coordination and Sample Chain-of-Custody
Independently drawing, sealing, and submitting samples to accredited laboratories, and interpreting the results for the buyer.
Purpose: Ensure test results reflect the actual shipment, not a hand-picked sample supplied by the factory.
Testing and packaging
On-Site Product Testing
Field tests performed during inspection using portable equipment: measurements, functional checks, colour comparison, weight, moisture, and basic safety checks.
Purpose: Immediate verification without laboratory delay.
Packaging, Labelling, and Marking Compliance Check
Verification of carton markings, barcodes, retail labels, legal declarations, language requirements, and destination-market regulations.
Purpose: Prevent customs rejections and retailer chargebacks.
Packing and Transit Durability Check
Drop tests, carton strength, moisture protection, and palletisation review.
Purpose: Ensure goods arrive in the condition they left.
Quantity and shipment
Quantity and Weight Verification
Independent count and weigh-in of shipped goods.
Purpose: Prevent short-shipment and over-invoicing.
Container Loading Supervision and Sealing
Supervising container condition, loading sequence, carton count, photographic record, and seal number documentation.
Purpose: The buyer’s proof of what was loaded and that nothing was tampered with afterwards.
Fumigation, Phytosanitary, and Health Certificate Coordination
Arranging and witnessing required treatments and certifications for destination-market entry.
Purpose: Avoid shipments being held or destroyed at the port of arrival.
Documents and payment
Export Documentation Review and Coordination
Checking commercial invoice, packing list, certificate of origin (GSP/REX), bill of lading, and LC compliance before submission.
Purpose: Avoid payment delays and customs holds caused by document errors.
Freight, Forwarder, and Customs Liaison
Coordinating with forwarders and customs brokers on the buyer’s behalf and tracking the shipment to departure.
Purpose: A single point of contact across the logistics chain.
Payment Milestone Verification
Confirming production or shipment milestones have been met before advising the buyer to release deposits or balance payments.
Purpose: Link money to verified progress, not supplier claims.
Inspection stages
PSI vs DUPRO vs Loading Supervision
Each inspection happens at a different point and answers a different question.
Buying from a new factory? Start with supplier verification and factory audit.
FAQs
Pre-Shipment Inspection FAQs
Answers to the questions buyers ask before booking a final random inspection in Bangladesh.
What is a pre-shipment inspection?
A pre-shipment inspection (PSI), also called a final random inspection (FRI), is a quality control check made right before goods leave the factory, once 100% of the order is manufactured and at least 80% is packed for export.
When should a pre-shipment inspection be done?
When production is finished and at least 80% of the cartons are sealed, so the inspector can pick cartons at random from the packed goods.
What does a PSI check?
Quantity, workmanship, function, measurements, labelling and packaging, sampled under AQL against the buyer's specification and reference samples.
What is the difference between PSI and 100% inspection?
A PSI checks a random sample under AQL. A 100% inspection checks every unit and separates defective goods, which suits high-value, high-risk or previously failed orders.
What happens if goods fail the pre-shipment inspection?
The buyer decides: hold the balance payment, ask the factory to rework or sort the goods, then re-inspect, or accept the goods with a discount.
Is PSI the same as loading supervision?
No. A PSI checks the quality and quantity of packed goods. Loading supervision happens later and records container condition, carton count and the seal number.
What do I need to provide before a PSI?
The purchase order, product specifications, reference samples, AQL tolerances, the factory address and the expected inspection date.
Can you link inspections to payment?
Yes. With payment milestone verification, we confirm that production or shipment milestones are met before advising you to release deposits or balance payments.
Check Your Goods Before You Pay the Balance
Send your purchase order, specifications, reference samples and AQL. We will confirm the checklist and schedule the inspection once production is finished and 80% of cartons are sealed.
