Third-Party Inspection Agency · Bangladesh

DUPRO Production Inspection and Investigation in Bangladesh

We offer During Production Inspection (DUPRO), an on-site quality control service performed while your goods are actively being manufactured. It typically happens once 10% to 80% of the order is completed, allowing the buyer to catch and fix manufacturing flaws before the entire batch is ruined.

  • Specs, samples and AQL from you
  • Visit at 10%–20% produced
  • Root-cause investigation

How it works

Hire Us as Your Third-Party DUPRO Inspection Company

The buyer can hire us as a third-party inspection company (or assign their own QA team) and provide their product specifications, reference samples, and Acceptance Quality Limit (AQL) standards. We act as the inspection agency and schedule a visit with the factory once at least 10%–20% of the units are produced.

You share the standardsProduct specifications, reference samples and Acceptance Quality Limit (AQL) standards.
We schedule the factory visitOnce at least 10%–20% of the units are produced.
You decide with evidenceA report with findings, photos and the factory's corrective actions.

Why buyers book DUPRO

What Our DUPRO Means for Buyers' Orders

Three things change for your order when an inspector is on the factory floor while production is running.

01

Early Intervention

Instead of waiting until the end of production to discover a mistake, our DUPRO acts as an early warning system on the factory floor.

02

Specification Verification

We ensure the factory follows your exact design, uses approved raw materials, and maintains consistent quality across the production line.

03

Schedule Monitoring

Our inspectors check the factory’s daily output rate to confirm your supplier will finish on time.

Production investigation

DUPRO Production Investigation: From Defect to Root Cause

Finding a defect is half the job. When a DUPRO shows a problem, our inspectors investigate where it starts, so the factory fixes the cause and not only the faulty units.

1FindDefects are found and graded critical, major or minor during sampling.
2TraceWe trace each repeated defect to its line, operation, machine or material lot.
3FixThe factory agrees a corrective action and who is responsible for it.
4Re-checkThe fix is confirmed at a follow-up visit or the pre-shipment inspection.

Sectors we inspect

DUPRO Production Inspection by Industry

Each industry fails in different places. Our checklist for every DUPRO starts from your specification and the risks that are typical for your product.

Sector 1

Contract Pharmaceuticals, Nutraceuticals & Medical Disposables

For contract-made health products, DUPRO focuses on what can be checked on the packing line and against the buyer’s specification.

  • Lot number, expiry date and label artwork on samples
  • Fill count, fill weight and blister or seal integrity
  • Dimensions and pack seal condition of medical disposables
  • Carton, shipper marking and packing-area housekeeping

A DUPRO does not replace regulatory GMP inspections or laboratory testing.

Sector 2

Home Textiles and Terry Products

Towels, bed linen and other home textiles are checked for weight, size and finish before the full order is woven, cut and sewn.

  • Fabric weight (GSM) and finished size after hemming
  • Pile density, pulled loops and weaving faults on terry
  • Shade against the approved sample and between batches
  • Hem and selvedge stitching, labels, folding and packing
Sector 3

Ready-Made Garments (RMG) — Deepening the Core

RMG is Bangladesh’s core export. A mid-run check keeps size, sewing quality and shade consistent across lines and colours.

  • Measurements against the size specification
  • Stitches per inch, seam puckering and open seams
  • Shade variation between panels, bundles and lots
  • Trims, accessories, labels and end-of-line reject levels
Sector 4

Leather and Leather Goods

Bags, wallets, belts and other leather goods are checked for material grade, workmanship and fittings while production is still running.

  • Leather grade, grain defects and colour consistency
  • Edge painting, stitching and lining finish
  • Zips, buckles and metal fittings work smoothly
  • Signs of moisture or mould before packing
Sector 5

Consumer Electronics Assembly, Cables & Electrical Accessories

For assembled electronics and electrical accessories, samples are checked for function, marking and build quality against your specification.

  • Function check on sample units
  • Cable length, conductor and insulation condition
  • Plug, pin and connector dimensions
  • Rating labels and required marks are present and correct

Electrical safety tests are run on the factory’s equipment where agreed.

Sector 6

Ceramics and Tableware

Ceramic defects come from forming, glazing and firing. A DUPRO finds them while the kiln schedule can still be adjusted.

  • Glaze defects such as pinholes, crawling and specks
  • Chips, cracks, warpage and wobble
  • Size, capacity and set completeness
  • Decoration and decal position, and protective packing
Sector 7

Plastics, Packaging, and Household Goods

Moulded and packaging products repeat the same fault on every cycle until the cause is fixed, so early checks protect the whole run.

  • Flash, short shots, sink marks and warpage
  • Wall thickness, weight, colour and lid fit
  • Print quality and registration on packaging
  • Carton condition and stacking of finished goods

Need a DUPRO for Another Product?

Send us your specification, reference sample and AQL. We will prepare a checklist for your product. To see the inspection by other product groups, read our during production inspection page.

Your choice

Third-Party Inspection or Your Own QA Team?

Both can run a DUPRO with your specifications, reference samples and AQL. The difference is independence, coverage and cost of having people on the factory floor.

Hire us as a third-party inspector

Independent of the factory

  • Inspector has no commercial tie to the supplier
  • Same checklist and AQL on every visit
  • No travel or local staff needed in Bangladesh
  • Root-cause investigation and follow-up included in the plan

Assign your own QA team

Works when you already have staff on the ground

  • Your team knows your product history
  • Needs people in Bangladesh or regular travel
  • Harder to cover several factories at once
  • We can still provide checklists or extra inspectors

FAQs

DUPRO Production Inspection and Investigation FAQs

It is an on-site check of your goods while they are being made (the DUPRO production inspection), followed by an investigation of any repeated defect to find its root cause on the production line, so the factory can fix it before the order is finished.

A DUPRO (During Production Inspection) is an on-site quality control check made while goods are being manufactured, typically once 10% to 80% of the order is complete. It lets the buyer catch and fix manufacturing flaws before the whole batch is finished.

We schedule the visit with the factory once at least 10%–20% of the units are produced, so there is enough output to sample and enough time left to correct problems.

A third-party inspector is independent of the factory, applies the same checklist and AQL every time, and gives you eyes on the factory floor in Bangladesh without sending your own staff.

Yes. Buyers can assign their own QA team. We can also support your team with checklists or extra inspectors when you have several factories or tight dates.

Your product specifications, reference samples, Acceptance Quality Limit (AQL) standards, the factory address and the planned production dates.

When the inspection finds repeated defects, we trace them to the line, operation, machine or material lot that causes them, and agree a corrective action with the factory.

Our inspectors check the factory’s daily output rate and compare it with the quantity left and your shipping date.

Contract pharmaceuticals and medical disposables, home textiles and terry, ready-made garments, leather goods, consumer electronics and electrical accessories, ceramics and tableware, and plastics, packaging and household goods.

Book a DUPRO Before Your Order Is Finished

Send your specifications, reference samples and AQL. We will confirm the checklist and schedule the factory visit once 10%–20% of the units are produced.